diff --git a/dunst/.config/dunst/dunstrc b/dunst/.config/dunst/dunstrc
new file mode 100644
index 0000000..ec8b8cd
--- /dev/null
+++ b/dunst/.config/dunst/dunstrc
@@ -0,0 +1,328 @@
+[global]
+    ### Display ###
+
+    # Which monitor should the notifications be displayed on.
+    monitor = 0
+
+    # Display notification on focused monitor.  Possible modes are:
+    #   mouse: follow mouse pointer
+    #   keyboard: follow window with keyboard focus
+    #   none: don't follow anything
+    #
+    # "keyboard" needs a window manager that exports the
+    # _NET_ACTIVE_WINDOW property.
+    # This should be the case for almost all modern window managers.
+    #
+    # If this option is set to mouse or keyboard, the monitor option
+    # will be ignored.
+    follow = none
+
+    # The geometry of the window:
+    #   [{width}]x{height}[+/-{x}+/-{y}]
+    # The geometry of the message window.
+    # The height is measured in number of notifications everything else
+    # in pixels.  If the width is omitted but the height is given
+    # ("-geometry x2"), the message window expands over the whole screen
+    # (dmenu-like).  If width is 0, the window expands to the longest
+    # message displayed.  A positive x is measured from the left, a
+    # negative from the right side of the screen.  Y is measured from
+    # the top and down respectively.
+    # The width can be negative.  In this case the actual width is the
+    # screen width minus the width defined in within the geometry option.
+    geometry = "500x5-10-30"
+
+    # Show how many messages are currently hidden (because of geometry).
+    indicate_hidden = yes
+
+    # Shrink window if it's smaller than the width.  Will be ignored if
+    # width is 0.
+    shrink = no
+
+    # The transparency of the window.  Range: [0; 100].
+    # This option will only work if a compositing window manager is
+    # present (e.g. xcompmgr, compiz, etc.).
+    transparency = 0
+
+    # The height of the entire notification.  If the height is smaller
+    # than the font height and padding combined, it will be raised
+    # to the font height and padding.
+    notification_height = 0
+
+    # Draw a line of "separator_height" pixel height between two
+    # notifications.
+    # Set to 0 to disable.
+    separator_height = 2
+
+    # Padding between text and separator.
+    padding = 8
+
+    # Horizontal padding.
+    horizontal_padding = 8
+
+    # Defines width in pixels of frame around the notification window.
+    # Set to 0 to disable.
+    frame_width = 5
+
+    # Defines color of the frame around the notification window.
+    frame_color = "#aaaaaa"
+
+    # Define a color for the separator.
+    # possible values are:
+    #  * auto: dunst tries to find a color fitting to the background;
+    #  * foreground: use the same color as the foreground;
+    #  * frame: use the same color as the frame;
+    #  * anything else will be interpreted as a X color.
+    separator_color = frame
+
+    # Sort messages by urgency.
+    sort = yes
+
+    # Don't remove messages, if the user is idle (no mouse or keyboard input)
+    # for longer than idle_threshold seconds.
+    # Set to 0 to disable.
+    # Transient notifications ignore this setting.
+    idle_threshold = 120
+
+    ### Text ###
+
+    font = Source Code Pro for Powerline 12
+
+    # The spacing between lines.  If the height is smaller than the
+    # font height, it will get raised to the font height.
+    line_height = 0
+
+    # Possible values are:
+    # full: Allow a small subset of html markup in notifications:
+    #        <b>bold</b>
+    #        <i>italic</i>
+    #        <s>strikethrough</s>
+    #        <u>underline</u>
+    #
+    #        For a complete reference see
+    #        <http://developer.gnome.org/pango/stable/PangoMarkupFormat.html>.
+    #
+    # strip: This setting is provided for compatibility with some broken
+    #        clients that send markup even though it's not enabled on the
+    #        server. Dunst will try to strip the markup but the parsing is
+    #        simplistic so using this option outside of matching rules for
+    #        specific applications *IS GREATLY DISCOURAGED*.
+    #
+    # no:    Disable markup parsing, incoming notifications will be treated as
+    #        plain text. Dunst will not advertise that it has the body-markup
+    #        capability if this is set as a global setting.
+    #
+    # It's important to note that markup inside the format option will be parsed
+    # regardless of what this is set to.
+    markup = full
+
+    # The format of the message.  Possible variables are:
+    #   %a  appname
+    #   %s  summary
+    #   %b  body
+    #   %i  iconname (including its path)
+    #   %I  iconname (without its path)
+    #   %p  progress value if set ([  0%] to [100%]) or nothing
+    #   %n  progress value if set without any extra characters
+    #   %%  Literal %
+    # Markup is allowed
+    format = "<b>%a</b>\n%b"
+
+    # Alignment of message text.
+    # Possible values are "left", "center" and "right".
+    alignment = left
+
+    # Show age of message if message is older than show_age_threshold
+    # seconds.
+    # Set to -1 to disable.
+    show_age_threshold = 60
+
+    # Split notifications into multiple lines if they don't fit into
+    # geometry.
+    word_wrap = yes
+
+    # When word_wrap is set to no, specify where to ellipsize long lines.
+    # Possible values are "start", "middle" and "end".
+    ellipsize = middle
+
+    # Ignore newlines '\n' in notifications.
+    ignore_newline = no
+
+    # Merge multiple notifications with the same content
+    stack_duplicates = true
+
+    # Hide the count of merged notifications with the same content
+    hide_duplicate_count = false
+
+    # Display indicators for URLs (U) and actions (A).
+    show_indicators = yes
+
+    ### Icons ###
+
+    # Align icons left/right/off
+    icon_position = left
+
+    # Scale larger icons down to this size, set to 0 to disable
+    max_icon_size = 128
+
+    # Paths to default icons.
+    icon_path = /usr/share/icons/gnome/16x16/status/:/usr/share/icons/gnome/16x16/devices/
+
+    ### History ###
+
+    # Should a notification popped up from history be sticky or timeout
+    # as if it would normally do.
+    sticky_history = yes
+
+    # Maximum amount of notifications kept in history
+    history_length = 20
+
+    ### Misc/Advanced ###
+
+    # dmenu path.
+    dmenu = /usr/bin/dmenu -p dunst:
+
+    # Browser for opening urls in context menu.
+    browser = /usr/bin/google-chrome-stable
+
+    # Always run rule-defined scripts, even if the notification is suppressed
+    always_run_script = true
+
+    # Define the title of the windows spawned by dunst
+    title = Dunst
+
+    # Define the class of the windows spawned by dunst
+    class = Dunst
+
+    # Print a notification on startup.
+    # This is mainly for error detection, since dbus (re-)starts dunst
+    # automatically after a crash.
+    startup_notification = false
+
+    ### Legacy
+
+    # Use the Xinerama extension instead of RandR for multi-monitor support.
+    # This setting is provided for compatibility with older nVidia drivers that
+    # do not support RandR and using it on systems that support RandR is highly
+    # discouraged.
+    #
+    # By enabling this setting dunst will not be able to detect when a monitor
+    # is connected or disconnected which might break follow mode if the screen
+    # layout changes.
+    force_xinerama = false
+
+# Experimental features that may or may not work correctly. Do not expect them
+# to have a consistent behaviour across releases.
+[experimental]
+    # Calculate the dpi to use on a per-monitor basis.
+    # If this setting is enabled the Xft.dpi value will be ignored and instead
+    # dunst will attempt to calculate an appropriate dpi value for each monitor
+    # using the resolution and physical size. This might be useful in setups
+    # where there are multiple screens with very different dpi values.
+    per_monitor_dpi = false
+
+[shortcuts]
+
+    # Shortcuts are specified as [modifier+][modifier+]...key
+    # Available modifiers are "ctrl", "mod1" (the alt-key), "mod2",
+    # "mod3" and "mod4" (windows-key).
+    # Xev might be helpful to find names for keys.
+
+    # Close notification.
+    close = ctrl+space
+
+    # Close all notifications.
+    close_all = ctrl+shift+space
+
+    # Redisplay last message(s).
+    # On the US keyboard layout "grave" is normally above TAB and left
+    # of "1". Make sure this key actually exists on your keyboard layout,
+    # e.g. check output of 'xmodmap -pke'
+    #history = ctrl+h
+
+    # Context menu.
+    context = ctrl+shift+period
+
+[urgency_low]
+    # IMPORTANT: colors have to be defined in quotation marks.
+    # Otherwise the "#" and following would be interpreted as a comment.
+    background = "#073642"
+    foreground = "#eee8d5"
+    frame_color = "#859900"
+    timeout = 10
+    # Icon for notifications with low urgency, uncomment to enable
+    #icon = /path/to/icon
+
+[urgency_normal]
+    background = "#073642"
+    foreground = "#eee8d5"
+    frame_color = "#859900"
+    timeout = 10
+    # Icon for notifications with normal urgency, uncomment to enable
+    #icon = /path/to/icon
+
+[urgency_critical]
+    background = "#073642"
+    foreground = "#eee8d5"
+    frame_color = "#cb4b16"
+    timeout = 0
+    # Icon for notifications with critical urgency, uncomment to enable
+    #icon = /path/to/icon
+
+# Every section that isn't one of the above is interpreted as a rules to
+# override settings for certain messages.
+# Messages can be matched by "appname", "summary", "body", "icon", "category",
+# "msg_urgency" and you can override the "timeout", "urgency", "foreground",
+# "background", "new_icon" and "format".
+# Shell-like globbing will get expanded.
+#
+# SCRIPTING
+# You can specify a script that gets run when the rule matches by
+# setting the "script" option.
+# The script will be called as follows:
+#   script appname summary body icon urgency
+# where urgency can be "LOW", "NORMAL" or "CRITICAL".
+#
+# NOTE: if you don't want a notification to be displayed, set the format
+# to "".
+# NOTE: It might be helpful to run dunst -print in a terminal in order
+# to find fitting options for rules.
+
+#[espeak]
+#    summary = "*"
+#    script = dunst_espeak.sh
+
+#[script-test]
+#    summary = "*script*"
+#    script = dunst_test.sh
+
+#[ignore]
+#    # This notification will not be displayed
+#    summary = "foobar"
+#    format = ""
+
+#[history-ignore]
+#    # This notification will not be saved in history
+#    summary = "foobar"
+#    history_ignore = yes
+
+#[signed_on]
+#    appname = Pidgin
+#    summary = "*signed on*"
+#    urgency = low
+#
+#[signed_off]
+#    appname = Pidgin
+#    summary = *signed off*
+#    urgency = low
+#
+#[says]
+#    appname = Pidgin
+#    summary = *says*
+#    urgency = critical
+#
+#[twitter]
+#    appname = Pidgin
+#    summary = *twitter.com*
+#    urgency = normal
+#
+# vim: ft=cfg
diff --git a/polybar/.config/polybar/config b/polybar/.config/polybar/config
index 4f6008a..225f291 100644
--- a/polybar/.config/polybar/config
+++ b/polybar/.config/polybar/config
@@ -27,7 +27,7 @@ alert = #bd2c40
 i3-focused-background = #93A1A1
 i3-unfocused-background = #002b36
 i3-visible-background = #002b36
-i3-urgent-background = #002b36
+i3-urgent-background = #657b83
 
 [bar/primary]
 monitor = ${env:PRIMARY:eDP1}
@@ -78,7 +78,7 @@ font-1 = FontAwesome:pixelsize=12;1
 
 modules-left =
 modules-center = i3
-modules-right =
+modules-right = gpmdp
 
 [bar/laptop]
 monitor = ${env:LAPTOP}
@@ -150,14 +150,14 @@ label-urgent-padding = 2
 [module/cpu]
 type = internal/cpu
 interval = 2
-format-prefix = ""
+format-prefix = " "
 format-prefix-foreground = ${colors.foreground}
 label = %percentage:2%%
 
 [module/memory]
 type = internal/memory
 interval = 2
-format-prefix = ""
+format-prefix = " "
 format-prefix-foreground = ${colors.foreground}
 label = %percentage_used%%
 
@@ -165,7 +165,7 @@ label = %percentage_used%%
 type = internal/network
 interface = wlp2s0
 interval = 3.0
-format-connected-prefix = ""
+format-connected-prefix = " "
 format-connected = <label-connected>
 label-connected = %essid%
 
@@ -186,7 +186,7 @@ type = internal/network
 interface = enp0s31f6
 interval = 3.0
 
-format-connected-prefix = ""
+format-connected-prefix = " "
 format-connected-prefix-foreground = ${colors.foreground}
 label-connected = %local_ip%
 
@@ -205,7 +205,7 @@ date-alt = " %Y-%m-%d"
 time = %H:%M
 time-alt = %H:%M:%S
 
-format-prefix = 
+format-prefix = " "
 format-prefix-foreground = ${colors.foreground}
 
 label = %date% %time%
@@ -272,6 +272,11 @@ type = custom/script
 exec = ~/.config/polybar/scripts/updates-arch-combined.sh
 interval = 600
 
+[module/gpmdp]
+type = custom/script
+exec = ~/.config/polybar/scripts/gpmdp.sh
+interval = 5
+
 [global/wm]
 margin-top = 5
 margin-bottom = 5
diff --git a/polybar/.config/polybar/scripts/gpmdp.sh b/polybar/.config/polybar/scripts/gpmdp.sh
new file mode 100755
index 0000000..3927c3e
--- /dev/null
+++ b/polybar/.config/polybar/scripts/gpmdp.sh
@@ -0,0 +1,21 @@
+#!/bin/bash
+
+RUNNING_CMD=$(ps ax | grep gpmdp | wc -l)
+STATUS_CMD=$(gpmdp-remote status)
+CURRENT_CMD=$(gpmdp-remote current)
+ICON_PLAYING='\uf001'
+ICON_PAUSE='\uf04c'
+
+if [ $RUNNING_CMD -gt 3 ]
+then
+  if [ $STATUS_CMD == "Playing" ]
+  then
+    echo -e $ICON_PLAYING $(gpmdp-remote current)
+  else
+    current=$CURRENT_CMD
+    if [ ${#current} -gt 3 ]
+    then
+      echo -e $ICON_PAUSE $(gpmdp-remote current)
+    fi
+  fi
+fi
diff --git a/polybar/.config/polybar/scripts/updates-arch-combined.sh b/polybar/.config/polybar/scripts/updates-arch-combined.sh
index 69ed7c9..17c3edc 100755
--- a/polybar/.config/polybar/scripts/updates-arch-combined.sh
+++ b/polybar/.config/polybar/scripts/updates-arch-combined.sh
@@ -11,7 +11,7 @@ fi
 updates=$(("$updates_arch" + "$updates_aur"))
 
 if [ "$updates" -gt 0 ]; then
-    echo "# $updates"
+    echo " $updates"
 else
     echo ""
 fi
diff --git a/rtv/.mailcap b/rtv/.mailcap
new file mode 100644
index 0000000..336e3f8
--- /dev/null
+++ b/rtv/.mailcap
@@ -0,0 +1,70 @@
+# Example mailcap file for Reddit Terminal Viewer
+# https://github.com/michael-lazar/rtv/
+#
+# Copy the contents of this file to {HOME}/.mailcap, or point to it using $MAILCAPS
+# Then launch RTV using the --enable-media flag. All shell commands defined in
+# this file depend on external programs that must be installed on your system.
+#
+# HELP REQUESTED! If you come up with your own commands (especially for OS X)
+# and would like to share, please post an issue on the GitHub tracker and we
+# can get them added to this file as references.
+#
+#
+#                              Mailcap 101
+# - The first entry with a matching MIME type will be executed, * is a wildcard
+# - %s will be replaced with the image or video url
+# - Add ``test=test -n "$DISPLAY"`` if your command opens a new window
+# - Add ``needsterminal`` for commands that use the terminal
+# - Add ``copiousoutput`` for commands that dump text to stdout
+
+###############################################################################
+# Commands below this point will open media in a separate window without
+# pausing execution of RTV.
+###############################################################################
+
+# Feh is a simple and effective image viewer
+# Note that rtv returns a list of urls for imgur albums, so we don't put quotes
+# around the `%s`
+image/x-imgur-album; feh --scale-down --auto-zoom -g 1024x768 %s; test=test -n "$DISPLAY"
+image/gif; mpv '%s' --autofit 1024x768 --loop=inf; test=test -n "$DISPLAY"
+image/*; feh --scale-down --auto-zoom -g 1024x768 '%s'; test=test -n "$DISPLAY"
+
+# Youtube videos are assigned a custom mime-type, which can be streamed with
+# vlc or youtube-dl.
+#video/x-youtube; vlc '%s' --width 1024 --height 768; test=test -n "$DISPLAY"
+video/x-youtube; mpv --ytdl-format=bestvideo+bestaudio/best '%s' --autofit 1024x768 -mute; test=test -n "$DISPLAY"
+
+# Mpv is a simple and effective video streamer
+video/*; mpv '%s' --autofit 1024x768 --loop=inf; test=test -n "$DISPLAY"
+
+###############################################################################
+# Commands below this point will attempt to display media directly in the
+# terminal when a desktop is not available (e.g. inside of an SSH session)
+###############################################################################
+
+# View images directly in your terminal with iTerm2
+# curl -L https://iterm2.com/misc/install_shell_integration_and_utilities.sh | bash
+# image/*; curl -s %s | ~/.iterm2/imgcat && read -n 1; needsterminal
+
+# View true images in the terminal, supported by rxvt-unicode, xterm and st
+# Requires the w3m-img package
+# image/*; w3m -o 'ext_image_viewer=off' '%s'; needsterminal
+
+# Don't have a solution for albums yet
+#image/x-imgur-album; echo
+
+# 256 color images using half-width unicode characters
+# Much higher quality that img2txt, but must be built from source
+# https://github.com/rossy/img2xterm
+#image/*; curl -s '%s' | convert -resize 80x80 - jpg:/tmp/rtv.jpg && img2xterm /tmp/rtv.jpg; needsterminal; copiousoutput
+
+# Display images in classic ascii using img2txt and lib-caca
+#image/*; curl -s '%s' | convert - jpg:/tmp/rtv.jpg && img2txt -f utf8 /tmp/rtv.jpg; needsterminal; copiousoutput
+
+# Full motion videos - requires a framebuffer to view
+#video/x-youtube; mpv -vo drm -quiet '%s'; needsterminal
+#video/*; mpv -vo drm -quiet '%s'; needsterminal
+
+# Ascii videos
+# video/x-youtube; youtube-dl -q -o - '%s' | mplayer -cache 8192 -vo caca -quiet -; needsterminal
+# video/*; wget '%s' -O - | mplayer -cache 8192 -vo caca -quiet -; needsterminal